This is a 2 oz. package of Black Velour Flocking material from Detail Master. It's for average to skilled modelers. This package contains authentic looking material for model cars. Detail Master's flocking is custom made with very fine, short fibers, then dyed to specification witha flat finish. FEATURES: Loose fiber rayon material. Used for carpeting, door panels, seats, headliners, and other surfaces. This material can be blended for custom colors. Detailed instruction sheet. INCLUDES: One 2 oz. Package of Black Velour Flocking Material REQUIRES: Dust Mask White Glue Screen or Strainer SPECS: Weight: 2 Ounces Color: Black
This is a 5' Black Battery Cable for 1/24 - 1/25 models. It's made by Detail Master for advanced modelers. FEATURES: Important and realistic visual element in most engine compartments. Cable wire may be used for autos, airplanes, landing gears and more. Battery cable may also be used for large vacuum hose. INCLUDES: One Package of Black Battery Cable REQUIRES: Model for Assembly and Use Hobby Knife or Wire Cutter SPECS: Diameter: .019"" Length: 5' (60"") (See chart below for further SPEC measurements) SCALE MODEL SIZE CHART Wire Diameter | 1/12 | 1/16 | 1/24 | 1/35 | 1/43 | 1/48 | 1/72 | .019 inches | .23 | .30 | .46 | .67 | .82 | .91 | 1.36 | or .48mm | 5.8 | 7.7 | 12 | 17 | 21 | 23 | 34 |
This is a 5' Red Battery Cable for 1/24 - 1/25 models. It's made by Detail Master for advanced modelers. FEATURES: Important and realistic visual element in most engine compartments. Cable wire may be used for autos, airplanes, landing gears and more. Battery cable may also be used for large vacuum hose. INCLUDES: One Package of Red Battery Cable REQUIRES: Model for Assembly and Use Hobby Knife or Wire Cutter SPECS: Diameter: .019"" Length: 5' (60"") (See chart below for further SPEC measurements) SCALE MODEL SIZE CHART Wire Diameter | 1/12 | 1/16 | 1/24 | 1/35 | 1/43 | 1/48 | 1/72 | .019 inches | .23 | .30 | .46 | .67 | .82 | .91 | 1.36 | or .48mm | 5.8 | 7.7 | 12 | 17 | 21 | 23 | 34 |
This is a Sheet of 1/24 Scale Mahogany Woodgrain Waterslide Decal Paper / from Detail Master. / / FEATURES: Waterslide-type decal paper. / Includes light and dark mahogany colors. / Gives added realism to interior or exterior of all types of vehicles. / Great for dioramas too! / / INCLUDES: One Sheet of 1/24 Scale Mahogany Woodgrain Waterslide Decal Paper. / / REQUIRES: Decal Setting Solution / Hobby Knife or Scissors / Water / Dry Tissue / Adult Supervision / / SPECS: Length: 11"" (286mm) / Width: 8-1/2"" (221mm)
ProductDescriptionThis is a 2 oz. package of Gray Velour Flocking material from Detail Master. It's for average to skilled modelers. This package contains authentic looking material for model cars. Detail Master's flocking is custom made with very fine, short fibers, then dyed to specification with a flat finish. FEATURES: Loose fiber rayon material. Used for carpeting, door panels, seats, headliners, and other surfaces. This material can be blended for custom colors. Detailed instruction sheet included. INCLUDES: One 2 oz. Package of Gray Velour Flocking Material REQUIRES: Dust Mask White Glue Screen or Strainer SPECS: Weight: 2 Ounces Color: Gray
This is a package of Gray Race Car Ignition Wire for 1/24 - 1/25 vehicles. / It's made by Detail Master for experienced modelers. / / Race cars often use a heavily insulated ignition wire that is thicker than / street car wire. This product accurately represents wire for 1/24-1/25 scale / drag cars, stock cars, sports cars, and other modern racing machinery. / / FEATURES: Race car ignition wire adds realism to plastic scale models. / Enough detail wire for several models. / Wire can be used as a vacuum hose and small brake line. / / INCLUDES: One Package of Gray Ignition Wire / / REQUIRES: 1/24 - 1/25 Race Cars for Assembly and Use / Sprue Cutter or Wire Cutter / / SPECS: Diameter: .016"" (.41mm) / Length: 5' (60"") / (See chart below for further SPEC measurements) / / SCALE MODEL SIZE CHART / Wire Diameter | 1/12 | 1/16 | 1/24 | 1/35 | 1/43 | 1/48 | 1/72 / .016"" | .19 | .26 | .39 | .56 | .69 | .77 | 1.15 / OR .41mm | 4.9 | 6.6 | 9.9 | 14 | 30 | 20 | 83
These are 1/24 - 1/25 Photo-Etched Brake/Fuel/Nitrous Line Fitting Parts from Detail Master. It's for average modelers. FEATURES: Small photo-etch pieces are attached to a sprue frame. Fittings for use with DM #1151, #1152, and #1153 - all three sizes on one etch part. Parts work well on stock, drag, street machines or any other vehicle. Fittings include washers, hexes and line brackets. Easy instructions for assembly. INCLUDES: One Set of Brake/Fuel/Nitrous Line Fitting Parts for Specific Detail Master Kits REQUIRES: Assembly with DM #1151, #1152, and #1153 Kits Tape Small Precision Shears Pin Vise Tweezers CA Glue and Epoxy SPECS: Scale: 1/24 - 1/25
This is a 1-Sheet Engine Detail Set (#1) for 1/24 scale plastic models. / It's made by Detail Master for ages 12 and over. / / FEATURES: Includes radiator caps and pressure release levers, oil filter caps, / air filter top nuts, oil pan bolt heads and timing indicators. / Thin stainless steel is bright with a durable finish. / Detailed instructions included. / Parts may be cleaned and polished with auto wax. / Easy to use parts that are a cut above normal model engines. / / INCLUDES: One Sheet Engine Detail Set (#1) / / REQUIRES: Small Shears / Epoxy and Cyanoacrylate Glue / Flat-Nose Pliers / Tape / / SPECS: For use with 1/24 scale plastic models
This is a package of (#3) Braided Line from Detail Master. / For use on plastic model cars. / / Many race cars and street cars use metal braided hose with A/N fittings / for oil, fuel and coolant lines. Detail Master fittings and miniature braided / hose duplicates the real things on plastic models. / / FEATURES: Custom made braid with fine strands and a realistic finish. / Designed to be used with Fittings (DM3023/DTMS3023). / / INCLUDES: One Package of (#3) Braided Line / / REQUIRES: Plastic Model for Use / Hobby Knife / / SPECS: Diameter: .035""(.89mm) / Length: 2' (24"")
